Hydraulic pump test bench TSPP-90

The TSSp 90 test bench is intended for the dynamic and functional testing of hydraulic pumps inclosed and open circuits.lt is possible to carry outtests on single and double, piston, vane, gear orsimilar pumps, both right and left-handed. The machine is also capable of testing piston, vane and gear motors in open circuit through a dedicated block.

The machine carries out testing of the compnents and verifies that it meets the component acceptability requirements of the repaired product.lt also carries out customizable test cycles with combined pressure and speed ramps, within the limits of the bench's performance. The test bench issized to test pumps with flow rates up to 400 l/min(66USG)and pressures up to 420 bar(6.092 psi)

Within the limits of the 90 kW installed power of the electric motor.The test area is equipped with a universal support on which the unit under test will be mounted with the aid of an adaptation flange and blocked using manual fixing systems. The connection of thesupply pipes and the electrical and auxiliary connections is carried out manually by the operator.The test bench measures flow rates, pressures and speed, calculating the volumetric, mechanical andtotal efficiency of the units under test.

Techinical Data

• Variable reversible electric motor:
• 90kW, 500–3000 RPM50/60Hz
• Nominal torque:1.400Nm at1.500RPM
• Maxflow:400l/min
• Maxpressure:420bar(6.092psi)
• Tank:800L(211USG)with sensors of level and temperature
• 200L(52USG)Off-Linecircuitwhichperforms
• Cooling with an air/oil ex-changer
• Industrial  PC on mobile arm with 22"monitor,waterproof
• Nexterbox  hardware and software
• Max oil temperature:60°C(140°F)
• Cleanliness of the oil:ISO18/15/13 (ISO4406-1999)

Layout demensions :2.400x4.000x3.100mm(94,48x157,48x122,04Inch)(l;d;h)
The origin of production: Italy